The company is interested in continuing buying raw materials of such items:
Wastepaper grades MC-4A, MC-5B, MC-6B
MS-4A — Used non-moisture paper bags (no bituminous impregnation layer and reinforced layers)
MS-5B — Waste production and consumption of corrugated cardboard, paper and cardboard used in its production
MS-6B — All kinds of waste paperboard production and consumption (except electrical, roofing and footwear) with black and white color printing.
Technical Requirements
Waste paper should not contain fiber, bags from under ashes, pasted with thermoplastic glue spine books moisture-waste paper and cardboard, unfit for consumption as fibrous material, covered with polyethylene and other polymer films, varnishes, resins, fabrics, foil, paraffined, bitumen, oiled, glue, metallized impregnated with chemicals, with wax, sand, rotten and burned.
Moisture of all groups paper should be no more than 15%
The mass of party is determing on 12% recycled moisture of waste paper.
Pack
Waste paper must be packed in bales. One brand of waste paper should be paked in bales, weight from 200 to 600 kg but not exceeding 800 kg. Waste paper in the bails must be tightly compressed.
Piles should be tied soft steel wire diameter (2,5 ± 0,6) mm GOST 3282 or mild steel packaging GOST 3560 of Ukraine not more than 0,5 mm x 20.0 mm
Technical timber (thickness of 8 to 45 cm in length from 2 to 4 m)
Depending on the purpose timber must correspond to the conditions below
For the production of wood, wood fiber boards, and hydrolytic production:
The thickness of the upper end, at least 4 cm
Length, 1.0-6.0 m
Gradation in length, 1.0 m
For the production of wood-chip packaging, items of everyday and for industrial purposes:
The thickness of the upper end, not less than 6 cm
Length, 0.4 - 6.5 m
Gradation in length, 0.1 m
Maximum deviations from the nominal length - from 0 to 0,1 m, and for the raw length is 1m ± 0,02m
Raw requirements
The quality of wood raw material must correspond to the conditions below:
Rot and hollow. Allowed up to 1.2 diameter end with the release of the second end to 1.3 diameter
Outer rot.Not allowed
Burnt wood. Not allowed in the raw material for the production of fibreboard and particle board
Other defects of wood according to GOST 2152-93 are allowed.
The height of residual limbs of timber should not exceed 5 cm
Wood raw materials can be delivered in the cortex or bark. Non-stripping bark.
Wood raw materials thicker than 60 cm at the request of the consumer must be supplied in split form. In this case the maximum line splitting at the ends of any part thereof should not exceed 40 cm
Value of raw materials supplied by size and species groups (coniferous and deciduous) set in the contract between the consumer and the supplier.
Accounting for wood raw materials up to 3,0 m - GOST 3243-88, a length of 3.0 meters or more - GOST-2292-88.
Requirements for packaging and labeling
Wood raw materials should be placed in transport packages.
For each package a label states the name of the manufacturer, and volume of the package.
Raw materials in the packages can be concluded in different directions. A package will provide for storage of raw materials during transportation and handling operations.
In agreement with the consumer supplying of raw materials may be in non-packaging form.
